Quick Answer: How High Does A Washer Drain Need To Be?

Can I drain my washer into my yard?

Household wastewater from washing machines, bathroom sinks, showers, and bathtubs is considered “gray” because it is only lightly soiled and poses a minimal health risk.

As long as you’re only putting biodegradable products down the drain, graywater is perfectly safe for irrigating plants..

Can I shorten washing machine drain hose?

Shortening the drain hose of the washing machine is sometimes the only way out if its length is several times greater than the distance required to connect to the sewer. Twisting will lead to delays in the drain, and simple cutting will make it impossible to use special tips.

How should a washing machine waste pipe be fitted?

When fitting a standpipe for a washing machine the pipe must be higher than the washing machine drum to prevent syphoning. The hole which goes through the wall should be sloping downwards towards the outside of the property, so water drains away from the appliance.

Does Spin Cycle drain water?

You can turn on the spin cycle to see if the water will drain, but if that doesn’t help, you’re right back where you started – with a load of soaking laundry and a washer full of water. … It removes the water from the tub during the spin cycle.

Can washing machine drain hose be too long?

Go up too far or along too far and the drain pump will be under too much load. It either won’t manage to pump at all or won’t pump efficiently and it won’t last as long as it should.

Are you supposed to drain your washing machine?

If you have a front-loading machine, you need to drain the water from a filter located along the bottom of its front end. If your machine is top-loading, you can unhook the drain hose in back and fill a bucket with that.

How far can you run washing machine drain hose?

The answer to this question is complicated by the fact that it is much harder to pump water vertically than horizontally. Washing machine manuals typically specify a minimum height of 39” for the entry of the drain hose into the standpipe or faucet box, and a maximum height of 96” (8 feet).

What causes a washing machine to not spin and drain?

If the washer won’t drain or spin, either something is stuck in the washing machine drain hose or pump, or the pump is broken. If a washer won’t drain or spin, the fix is simple if you’re even just a little bit handy with tools.

How do you unblock a washing machine waste pipe?

To unclog a clogged drain, first fill a bucket with boiling water and a pack of baking soda. Remove the drain pipe from your washing machine and slowly pour the water into the drain using a funnel. Wait a few minutes and test if it keeps draining if you pour water into it.